Analysis of the PM2.5 emission inventory and source apportionment in Jilin City,Northeast of China

Environmental Science and Pollution Research - This study collected and compiled statistical data on atmospheric pollution in Jilin City, China during 2013–2014, using models and methods to...     

Compression behaviors of mechanically biologically treated wastes of Tianziling landfill in Hangzhou,China

Environmental Science and Pollution Research - This study aimed to investigate the compression behaviors of mechanically biologically treated (MBT) wastes. For this purpose, the short-term...     

餐厨垃圾高温厌氧消化产沼气的试验研究

探究了温度、含固率、pH及接种率对餐厨垃圾厌氧消化产沼量的影响,并设计L9(34)正交试验进行厌氧发酵工艺优化研究。结果表明,在温度为55℃、含固率为8%(质量分数)、pH为7.00、接种率为90%(质量分数)时,厌氧发酵累积产沼量为809.0mL/g(以挥发性固体计);各影响因素对产沼量的影响大小为温度pH接种率含固率。     

异养硝化-好氧反硝化菌粪产碱杆菌的脱氮特性

为了对粪产碱杆菌(Alcaligenes faecalis No.4)的脱氮特性进行研究,提出了不同环境因子对菌株脱氮性能影响的对比实验。结果表明,该菌能利用柠檬酸钠和乙酸钠作为惟一碳源,以柠檬酸钠为碳源时脱氮活性最高,硝酸铵、氯化铵、碳酸铵和硫酸铵4种铵盐均能作为惟一氮源,而硝态氮和亚硝态氮几乎不能被该菌代谢转化;当温度在30~37℃、摇床转速超过120 r/min、p H为6~8之间时,该菌对氨氮的去除效果最好;该菌对高中低浓度的氨氮都具有很好的去除效果,对高浓度的氨氮有很好的耐受性;该菌对0%、3%盐度的适应期较短,对6%的盐度经过较长时间的适应期后,也能够快速地处理氨氮,具有良好的耐盐性。     

中型污水处理厂中药物和个人护理品的分布与去除

为了解15种药物及个人护理用品(PPCPs)在中小型污水处理厂中的分布及其去除效果,采用液相色谱-串联质谱(LC-MS/MS)技术对3座A2/O工艺的污水处理厂水样进行分析研究。结果显示,除普萘洛尔、吉非罗平和吲哚美辛在3座中小型污水处理厂各个工艺单元中均未被检出外,其余12种目标化合物的检出频率在90%~100%之间。进水水样中PPCPs的平均检出浓度为2 285.4 ng/L,其中咖啡因(CF)的平均检出浓度最高为973.3 ng/L,酮洛芬(KP)的平均检出浓度次之为844.7 ng/L,两者之和占进水水样中PPCPs平均含量的79.5%,表明污水处理厂的主要污染物为CF和KP。3座污水处理厂对CF的去除效果最为显著,平均去除率为95.3%,对15种PPCPs总去除效率在39.3%~82.8%之间。     

植物内重金属的赋存形态及分布特征分析方法研究进展

植物内重金属分析不仅有助于阐述重金属迁移转化规律,揭示植物修复机理,也是监测评价大气、水及土壤环境重金属污染状况的重要依据。研究针对植物样品中重金属赋存形态及分布特征的分析方法进行综述,分别介绍了其原理、优缺点及应用。提出制定统一高效的分析检测方法,深化植物内重金属的赋存形态及分布特征与环境相关性的研究以及建立数据共享平台是植物样品重金属信息分析方法的未来发展方向。     

湖北省湖库洪水调蓄能力及其空间分异特征

湖泊是抵御湖区水系洪水灾害的天然屏障，而水库是现代防洪工程体系的重要组成部分，两者共同肩负着防洪减灾的重任。为探明湖北省湖库洪水调蓄能力，选取湖泊可调蓄水量、水库防洪库容作为评估指标，通过构建湖库洪水调蓄能力评估模型，分析全省湖库洪水调蓄能力及空间分异特征。结论如下：（1）湖北省湖泊、水库综合洪水调蓄量为416.02×108m3，其中湖泊可调蓄水量为79.69×108m3，水库防洪库容为336.33×108m3，分别占湖库洪水调蓄功能总量的19.16%和80.84%;（2）湖泊可调蓄水量较大的地区包括武汉、荆州、鄂州、黄石等地市以及鄂东丘陵、江汉平原，而单位面积湖泊调蓄洪水能力较强的地区为鄂州、黄石、咸宁、黄冈，其值分别为405.99×104、400.31×104、392.32×104和391.22×104m3/km2;（3）水库防洪库容较大的地区主要为鄂西山地的宜昌和十堰，分别为119.18×108m3和 103.03×108m3，占全省防洪库容总量的66.06%，而鄂州、天门和神农架水库防洪库容极小，不足全省水库总防洪库容的1%;（4）湖库综合调蓄能力空间分布特征与水库洪水调蓄能力空间分布相一致；从湖泊、水库洪水调蓄能力的构成来看，以湖泊防洪为主和以水库防洪为主的地市不相上下，水库在湖北省防洪体系中占绝对主体地位，同时湖泊也发挥着不可或缺的作用。针对湖泊萎缩、水库险病等突出问题，可以通过退田还湖、除险加固等工作提高湖库综合调洪能力。本研究可为湖北省湖库防洪建设提供科学指导。 关键词： 湖泊；水库；洪水调蓄功能；空间分异；湖北省     

Adsorptive conversion of nitrogen dioxide from etching vent gases over activated carbon

Some metal etching operations emit limited flow rates of waste gases with reddish-brown NO₂ fume, which may cause visual and acidic-odor complaints, as well as negative health effects. In this study, tests were performed by passing caustic-treated waste gases vented from Al-etching operations through columns packed either with virgin or regenerated granular activated carbon (GAC) to test their adsorptive conversion performance of NO₂ in the gases. The gases contained 5–55 ppm NO₂ and acetic and nitric acids of below 3 ppm. Exhausted carbon was regenerated by scrubbing it with caustic solution and water, and dried for further adsorption tests. Results indicate that with an (empty bed residence time (EBRT) of 0.15 sec for the gas through the GAC-packed space, around 60% of the influent NO₂ of 54 ppm could be removed, and 47% of the removed NO₂ was converted by and desorbed from the carbon as NO. GAC used in the present study could be regenerated at least twice to restore its capacity for NO₂ adsorption. Within EBRTs of 0.076–0.18 sec, the adsorptive conversion capacity was linearly varied with EBRT. In practice, with an EBRT of 0.20 sec, a conversion capacity of 0.80 kg NO₂ (kg GAC)^?1 with an influent NO₂ of 40 ppm can be used as a basis for system design.

Implications: Some metal etching operations emit waste gases with reddish-brown (yellow when diluted) NO₂ fume which may cause visual and acidic-odor complaints, as well as negative health effects. This study provides a simple process for the adsorptive conversion of NO₂ in caustic-treated waste gases vented from metal-etching operations through a GAC column. With an EBRT of 0.20 sec, a conversion capacity of 0.80 kg NO₂ (kg GAC)^?1 with an influent NO₂ of 40 ppm can be used as a basis for system design. Saturated GAC can be regenerated at least twice by simply scrubbing it with aqueous caustic solution.